What are the requirements for a boiler room in NYC?

A one-stop Post about Boiler Rooms & Boiler Rooms Signage


Do you want to get TCO Approved?

Hi, we are Sign Guys NYC. We are determined to make your business grow.


Boiler rooms provide heat and hot water to occupants. Therefore, proper safety measures are needed to protect people from dangerous situations. That's where Boiler Room Safety HPD Signs come in. Boiler Room Signs help building owners and managers comply with Housing Preservation and Development (HPD) regulations. Also, Boiler Room Signs ensure the safety of everyone who enters the boiler room.

 This Boiler Room Safety HPD Signs guide provides codes, materials, installation instructions, and where to buy them. We'll also cover the requirements for a boiler room in NYC.

What are the requirements for a boiler room in NYC?

In addition to installing Boiler Room Safety HPD Signs, several requirements must meet for a boiler room to be considered safe and compliant in NYC. Here are some of the essential requirements:

Enclosure: According to section 27-419 of the NYC Administrative Code, boilers or furnaces in buildings (excluding one- or two-family dwellings and replacement boilers) must be enclosed and separated from the rest of the building by noncombustible construction with at least a one-hour fire-resistance rating.

Boilers carrying over 15 psi and with a rating of over ten horsepower must be located in a room or compartment with at least a two-hour fire-resistance rating. 

Boilers or furnaces near automotive repair shops, public garages, or high-hazard occupancy group A must be located in separate buildings or enclosed rooms with at least a two-hour fire-resistance rating. The vestibule of these enclosed rooms must be at least 50 square feet but at most 75 square feet. 

Access: The boiler room must have a clear and unobstructed path of egress to the outside of the building. 

Rooms containing boilers or furnaces, or other equipment of similar or more significant explosion hazard, should only be located within fifty feet of any place of assembly if separated by compliant construction. 

The maximum travel distance from any point within a room to an exit must be at most fifty feet. In addition, noncombustible ladders or stairs must lead to exit openings at least thirty-two inches by forty-eight inches.

Ventilation: The boiler room must be adequately ventilated to prevent the buildup of dangerous gasses. Ash storage pits and bins must be constructed of two-hour fire-resistive construction, with roofs made of noncombustible materials. 

Clearance: There must be sufficient clearance around the boiler and other equipment for safe operation and maintenance.

Fire protection: The boiler room must have adequate fire protection measures, such as sprinklers or a fire extinguisher.

Maintenance: To ensure safe and efficient operation, the boiler and other equipment must be adequately maintained.

Materials and Installation Instructions

Boiler Room Safety HPD Signs are typically made from durable materials that can withstand the harsh conditions of the boiler room environment. Some common materials include aluminum, PVC, and polystyrene. 

Installing Boiler Room Safety HPD Signs is a relatively simple process. Here's how to do it:

  1. Determine the location: Identify the site where the sign will be installed. As mentioned earlier, signs should be placed at the entrance to the boiler room, on the door leading to the boiler room, and inside the boiler room near the boiler and fuel-burning equipment.
  2. Mark the location: Use a measuring tape and a pencil to mark the sign's area. The sign should be centered in the middle of the door. The sign should be mounted 60" or five feet above the finished floor.
  3. Install the sign: Use double side adhesive tape to mount the sign to the wall or door.

Where to Buy Boiler Room Signs?

At Sign Guys NYC, we offer  Boiler Room Safety HPD Signs to meet the needs of any building. Our signs are made from high-quality materials and are designed to withstand the harsh conditions of the boiler room environment. We can also create custom signs to meet your specific requirements.

Contact us today to learn more about our Boiler Room Safety HPD Signs and how we can help keep your building safe and compliant. Don't wait until it's too late - invest in safety today!

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.